```{py:currentmodule} cantera ``` # Ideal Gas Constant Pressure Reactor An ideal gas constant pressure reactor, as implemented by the C++ class {ct}`IdealGasConstPressureReactor` and available in Python as the {py:class}`IdealGasConstPressureReactor` class. It is defined by the state variables: - $m$, the mass of the reactor's contents (in kg) - $T$, the temperature (in K) - $Y_k$, the mass fractions for each species (dimensionless) Equations 1-3 below are the governing equations for an ideal gas constant pressure reactor. ## Mass Conservation The total mass of the reactor's contents changes as a result of flow through the reactor's [inlets and outlets](sec-flow-device), and production of homogeneous phase species on [surfaces](sec-reactor-surface): $$ \frac{dm}{dt} = \sum_\t{in} \dot{m}_\t{in} - \sum_\t{out} \dot{m}_\t{out} + \dot{m}_\t{wall} $$ (igcpr-mass) Where the subscripts *in* and *out* refer to the sum of the corresponding property over all inlets and outlets respectively. A dot above a variable signifies a time derivative. ## Species Equations The rate at which species $k$ is generated through homogeneous phase reactions is $V \dot{\omega}_k W_k$, and the total rate at which species $k$ is generated is: $$ \dot{m}_{k,\t{gen}} = V \dot{\omega}_k W_k + \dot{m}_{k,\t{wall}} $$ The rate of change in the mass of each species is: $$ \frac{d(mY_k)}{dt} = \sum_\t{in} \dot{m}_\t{in} Y_{k,\t{in}} - \sum_\t{out} \dot{m}_\t{out} Y_k + \dot{m}_{k,gen} $$ Expanding the derivative on the left hand side and substituting the equation for $dm/dt$, the equation for each homogeneous phase species is: $$ m \frac{dY_k}{dt} = \sum_\t{in} \dot{m}_\t{in} (Y_{k,\t{in}} - Y_k) + \dot{m}_{k,\t{gen}} - Y_k \dot{m}_\t{wall} $$ (igcpr-species) ## Energy Equation As for the [ideal gas reactor](ideal-gas-reactor), we replace the total enthalpy as a state variable with the temperature by writing the total enthalpy in terms of the mass fractions and temperature and differentiating with respect to time: $$ H &= m \sum_k Y_k h_k(T) \frac{dH}{dt} &= h \frac{dm}{dt} + m c_p \frac{dT}{dt} + m \sum_k h_k \frac{dY_k}{dt} $$ Substituting the corresponding derivatives into the constant pressure reactor energy equation {eq}`constpressurereactor-energy` yields an equation for the temperature: $$ m c_p \frac{dT}{dt} = \dot{Q} - \sum_k h_k \dot{m}_{k,\t{gen}} + \sum_\t{in} \dot{m}_\t{in} \left(h_\t{in} - \sum_k h_k Y_{k,\t{in}} \right) $$ (igcpr-energy)